வார்ப்புரு:தகவல்சட்டம் போர்

தகவல்சட்டம் போர்
இடம் {{{place}}}

Template documentation[view] [edit] [history] [purge]

Usage

Battle of Lützen
the முப்பதாண்டுப் போர் பகுதி
The Battle of Lützen by Carl Wahlbom shows the death of King சுவீடனின் கஸ்டாவஸ் அடால்பஸ் on 16 November 1632.
நாள் 6 November (O.S.) or 16 November (N.S.), 1632 இடம் Near Lützen, southwest of லைப்சிக் (present-day ஜெர்மனி) 51°15′N 12°08′E Protestant victory (see Aftermath section)
பிரிவினர்
Sweden Protestant Union	புனித உரோமைப் பேரரசு Catholic League
தளபதிகள், தலைவர்கள்
சுவீடனின் கஸ்டாவஸ் அடால்பஸ் † Dodo von Knyphausen வார்ப்புரு:நாட்டுத் தகவல் Electorate of Saxony Bernhard of Saxe-Weimar Robert Munro, 18th Baron of Foulis	Albrecht von Wallenstein Heinrich Holk Count Gottfried zu Pappenheim (கா.ம.)
பலம்
12,800 infantry 6,200 cavalry 60 guns	10,000 infantry 7,000 cavalry, plus 3,000 infantry and 2,000 cavalry on arrival 24 guns
இழப்புகள்
3,400 dead and 1,600 wounded or missing	Probably about the same as Swedish casualtiesவார்ப்புரு:Fakeref

A military conflict infobox (sometimes referred to as a warbox) may be used to summarize information about a particular military conflict (a battle, campaign, war, or group of related wars) in a standard manner.

Information summarized in an infobox should follow the general guidance for writing a lead section. It should not "make claims" or present material not covered by the article. As with a lead section, there is some discretion in citing information in an infobox. The same guidance should be applied to an infobox as given for citations in a lead section. Information in an infobox must conform with verifiability, point-of-view and other policies.

Information in the infobox should not be "controversial". Refer the reader to an appropriate section in the article or leave the parameter blank rather than make an unsubstantiated or doubtful claim.

The infobox should be added using the {{infobox military conflict}} template, as shown below:

{{Infobox military conflict
| conflict    = 
| width       = 
| partof      = 
| image       = 
| image_size  =
| alt         =
| caption     = 
| date        = 
| place       = 
| coordinates = <!--Use the {{coord}} template -->
| map_type    = 
| map_relief  = 
| map_size    = 
| map_marksize = 
| map_caption = 
| map_label   = 
| territory   = 
| result      = 
| status      = 
| combatants_header = 
| combatant1  = 
| combatant2  = 
| combatant3  = 
| commander1  = 
| commander2  = 
| commander3  = 
| units1      = 
| units2      = 
| units3      = 
| strength1   = 
| strength2   = 
| strength3   = 
| casualties1 = 
| casualties2 = 
| casualties3 = 
| notes       = 
| campaignbox = 
}}

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

Parameters

• conflict – the name of the conflict being described (e.g. "Battle of Lützen" or "World War I").
• width – optional – the width of the infobox, e.g. "400px"; defaults to: "315px".
• partof – optional – the larger conflict containing the event described in the article. For battles or campaigns, this should be the war during which the event takes place; for particularly large wars, this may include a theatre (e.g. "the Eastern Front of World War II"). For wars, the parameter may be used to link to a larger group of wars (e.g. the Italian War of 1521–26 to the Italian Wars). It may be necessary to insert "the" before the name of the war for proper grammar.
• image – optional – an image for the warbox. Given in the form Example.jpg
• image_size – optional – a size for the image
• alt – optional – Alternative text for image that is accessible to screen readers to help the பார்வைக் குறைபாடு
• caption – optional – the text to be placed below the image.
• date – optional – the date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.
• place – the location of the conflict. For conflicts covering a wide area, a general description (e.g. "France", or "Europe", or "Worldwide") may be used.
• coordinates – optional – the location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title. Used to display the geographic location of the conflict and the location on a map added with the map_type parameter.
• map_type – optional – the base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.
• map_relief – optional – "yes" if the location map is a relief map; see {{location map}} for more details.
• map_size – optional – width of the location map in pixels (px), e.g. "150"; defaults to: "220".
• map_mark – optional – the name of a file to use as the location map marker, e.g. Green_pog.svg; defaults to: "Red_pog.svg".
• map_marksize – optional – width of the location map marker in pixels (px), e.g. "10"; defaults to: "8".
• map_caption – optional – caption displayed below the location map; defaults to "Location within {{{map_type}}}", e.g. "Location within Scotland".
• map_label – optional – the label placed next to the marker on the location map.
• territory – optional – any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.
• action – optional – In case of Coup d'État, short description of modus operandi, e.g. "...marched over the city...", "...dissolving the Congress of the Republic...", "...take the government hostage ...", "...put the country under military control ...", etc.
• result – optional – this parameter may use one of two standard terms: "X victory" or "Inconclusive". The term used is for the "immediate" outcome of the "subject" conflict and should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link or note should be made to the section of the article where the result is discussed in detail (such as "See the Aftermath

section"). Such a note can also be used in conjunction with the standard terms but should not be used to conceal an ambiguity in the "immediate" result. Do not introduce non-standard terms like "decisive", "marginal" or "tactical", or contradictory statements like "decisive tactical victory but strategic defeat". Omit this parameter altogether rather than engage in speculation about which side won or by how much.

• status – optional – for ongoing conflicts, the current status of the conflict. This should not be used if a final result (above) is provided.
• combatants_header – optional – sets the header text for the combatants section. Default is "Belligerents". In case of Coup d'État, use "Government-Insurgents   "
• combatant1/combatant2/combatant3 – optional – the parties participating in the conflict. This is most commonly the countries whose forces took part in the conflict; however, larger groups (such as alliances or international organizations) or smaller ones (such as particular units, formations, or groups) may be indicated if doing so improves reader understanding. When there is a large number of participants, it may be better to list only the three or four major groups on each side of the conflict, and to describe the rest in the body of the article. The combatant3 field may be used if a conflict has three distinct "sides", and should be left blank on other articles. Combatants should be listed in order of importance to the conflict, be it in terms of military contribution, political clout, or a recognized chain of command. If differing metrics can support alternative lists, then ordering is left to the editors of the particular article. The practice of writing in a "Supported by" subheading is deprecated (see discussion).
  • combatant1a/combatant2a/combatant3a – optional – in cases where the parties significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the combatantN fields (above).
  • combatant1b/combatant2b/combatant3b – optional – additional row, as above.
  • combatant1c/combatant2c/combatant3c – optional – additional row, as above.
  • combatant1d/combatant2d/combatant3d – optional – additional row, as above.
  • combatant1e/combatant2e/combatant3e – optional – additional row, as above.
• commander1/commander2/commander3 – optional – the commanders of the military forces involved. For battles, this should include military commanders (and other officers as necessary). For wars, only prominent or notable leaders should be listed, with an upper limit of about seven per combatant column recommended. Ranks and position titles should be omitted. The {{KIA}} and {{POW}} templates may be included immediately after the names of commanders who were killed in action or surrendered and were taken prisoner, respectively. The commander3 field can only be used if the combatant3 field is set.
  • commander1a/commander2a/commander3a – optional – in cases where the commanders significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the commanderN fields (above).
  • commander1b/commander2b/commander3b – optional – additional row, as above.
  • commander1c/commander2c/commander3c – optional – additional row, as above.
  • commander1d/commander2d/commander3d – optional – additional row, as above.
  • commander1e/commander2e/commander3e – optional – additional row, as above.
• units1/units2/units3 – optional – the units or formations involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. The units3 field can only be used if the combatant3 field is set.
• strength1/strength2 – optional – the numerical strength of the units involved.

• polstrength1/polstrength2 – optional – In case of Coup d'Etat, political organizations that supported the government (1) respective the insurgents (2).
• milstrength1/milstrength2 – optional – In case of Coup d'Etat, military units that supported the government (1) respective the insurgents (2).

• strength3 – optional – if combatant3 is set, this is a third strength field identical to the two above; if it is not set, this is an alternate combined field for use where only the total participation in a conflict is known.
• casualties1/casualties2 – optional – casualties suffered (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Note that this section of the infobox is headed "Casualties and losses". Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.
• casualties3 – optional – if combatant3 is set, this is a third casualty field identical to the two above; if it is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.
• notes – optional – optional field for further notes; this should only be used in exceptional circumstances.
• campaignbox – optional – optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.வார்ப்புரு:Campaign/doc

Microformat

TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools; see the monthly parameter usage report for this template.

TemplateData for தகவல்சட்டம் போர்

TemplateData

Summarize information about a particular military conflict (a battle, campaign, war, or group of related wars). Template parameters[Edit template data] This template has custom formatting. Parameter Description Type Status Conflict conflict The name of the conflict being described. Line required Width width Width of the infobox. Default 315px String optional Part of partof The larger conflict containing the event described in the article. Page name optional Image image An image for the warbox given in the form Example.jpg. File optional Image size image_size The size of the image String optional Alt alt Alternative textual description of the image String optional Caption caption The text to be placed below the image. String optional Date date The date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply. String optional Place place The location of the conflict. String required Coordinates coordinates The location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title. String optional Map Type map_type The base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details. String optional Map Relief map_relief "yes" if the location map is a relief map. String optional Map Size map_size Width of the location map in pixels (px). Default 220 Number optional Map Marker map_mark File to use as the location map marker. Default red_pog.svg String optional Map Marker Size map_marksize Width of the location map marker in pixels (px). Default 8 Number optional Map Caption map_caption Caption displayed below the location map. Default Location within {{{map_type}}} String optional Map Label map_label The label placed next to the marker on the location map. Line optional Territory territory Any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement. String optional Result result This parameter may use one of two standard terms: "X victory" or "Inconclusive". The term used is for the "immediate" outcome of the "subject" conflict and should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link or note should be made to the section of the article where the result is discussed in detail (such as "See the Aftermath section"). Such a note can also be used in conjunction with the standard terms but should not be used to conceal an ambiguity in the "immediate" result. Do not introduce non-standard terms like "decisive", "marginal" or "tactical", or contradictory statements like "decisive tactical victory but strategic defeat". Omit this parameter altogether rather than engage in speculation about which side won or by how much. String optional Status status For ongoing conflicts, the current status of the conflict. Line optional "Combatants" Header Text combatants_header Sets the header text for the combatants section. Default Belligerents Line optional Combatant 1 combatant1 A party participating in the conflict. String optional Combatant 2 combatant2 A party participating in the conflict. String optional Combatant 3 combatant3 A party participating in the conflict. (only if the conflict has three distinct "sides") String optional Combatant 1a combatant1a In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field. String optional Combatant 2a combatant2a In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field. String optional Combatant 3a combatant3a In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field. String optional Combatant 1b combatant1b In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field. String optional Combatant 2b combatant2b In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field. String optional Combatant 3b combatant3b In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field. String optional Combatant 1c combatant1c In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field. String optional Combatant 2c combatant2c In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field. String optional Combatant 3c combatant3c In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field. String optional Combatant 1d combatant1d In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field. String optional Combatant 2d combatant2d In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field. String optional Combatant 3d combatant3d In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field. String optional Commander of Combatant 1 commander1 The commanders of the military forces of Combatant (1) involved. String optional Commander of Combatant 2 commander2 The commanders of the military forces of Combatant 2 involved. String optional Commander of Combatant 3 commander3 The commanders of the military forces of Combatant 3 involved. String optional Units of Combatant 1 units1 The units or formations of Combatant 1 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. String optional Units of Combatant 2 units2 The units or formations of Combatant 2 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. String optional Units of Combatant 3 units3 The units or formations of Combatant 3 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. String optional Strength of Combatant 1 strength1 The numerical strength of Combatant 1. String optional Strength of Combatant 2 strength2 The numerical strength of Combatant 2. String optional Strength of Combatant 3 strength3 If Combatant 3 is set, this field is for the numerical strength of Combatant 3. If Combatant 3 is not set, this is an alternate combined field for use where only the total participation in a conflict is known. String optional Casualties of Combatant 1 casualties1 Casualties suffered by Combatant 1 (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc. String optional Casualties of Combatant 2 casualties2 Casualties suffered by Combatant 2 (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc. String optional Casualties of Combatant 3 casualties3 If Combatant 3 is set, this field is for the casualties suffered by Combatant 3, (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc. If combatant3 is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side. String optional Notes notes Optional field for further notes; this should only be used in exceptional circumstances. String optional Campaignbox campaignbox Optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}. String optional

See also

• {{Infobox military operation}}
• {{Infobox civil conflict}}
• {{Infobox civilian attack}}

The above documentation is transcluded from வார்ப்புரு:தகவல்சட்டம் போர்/doc. (edit | history)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.