பொதுக்கோப்பகம் ஒரு கட்டற்ற கோப்புகளின் சேமிப்பகமாகும். நீங்களும் உதவலாம்.
சுருக்கம்
விளக்கம்Vernier scale zero error +0.10.gif
English: This animation shows how to read calipers when there is a "zero error". In most cases, it is ideal that a caliper read 0.00 mm when the jaws are closed but the caliper in the animation shows a reading of +0.10 mm. This is the caliper's zero error, which in general may be zero or negative too. Since all measurements with these calipers would then overestimate lengths by +0.10 mm (i.e., a systematic error), the zero error must be subtracted from all length measurements. The formula for a proper reading of a caliper is "(actual reading) = (main scale) + (vernier scale) - (zero error)". In the animation, the main scale reading is 19.00 mm and the vernier scale reading is 0.54 mm, so the actual reading is 19.00 + 0.54 - (-0.10) = 19.44 mm. The error of the instrument is the width of the smallest sub-interval which is 0.02 mm in this case. The complete reading can be expressed as 19.44 mm ± 0.02 mm.
பகிர்ந்து கொள்ள – வேலையை நகலெடுக்க, விநியோகிக்க மற்றும் அனுப்ப
மீண்டும் கலக்க – வேலைக்கு பழகிக்கொள்ள.
கீழ்க்காணும் விதிகளுக்கு ஏற்ப,
பண்புக்கூறுகள் – நீங்கள் பொருத்தமான உரிமையை வழங்க வேண்டும், உரிமத்திற்கான இணைப்பை வழங்க வேண்டும் மற்றும் மாற்றங்கள் செய்யப்பட்டிருந்தால் குறிப்பிட வேண்டும். நீங்கள் ஏற்புடைய எந்த முறையிலும் அவ்வாறு செய்யலாம், ஆனால் எந்த வகையிலும் உரிமதாரர் உங்களை அல்லது உங்கள் பயன்பாட்டிற்கு ஒப்புதல் அளிக்கும் படி பரிந்துரைக்க கூடாது.
அதே மாதிரி பகிர் – நீங்கள் ரீமிக்ஸ் செய்தாலோ, உருமாற்றம் செய்தாலோ அல்லது பொருளை உருவாக்கினாலோ, உங்கள் பங்களிப்புகளை அல்லது இணக்கமான உரிமம் கீழ் அசலாக விநியோகிக்க வேண்டும்.